In calltracking, calls dialed to substitution numbers are forwarded to the phone numbers of your company.
Roistat forwards the calls to the phone numbers of your company without being the online telephone exchange. To use the additional options, as forwarding to different managers or transmitting the call to the voice mail, connect and configure the online telephone exchange.
The call forwarding may be configured to the Roistat SIP account or to the user's SIP.
The Session Initiation Protocol (SIP) is a protocol of transmission of data (in our case, voice messages) via the Internet. SIP-addresses or SIP accounts are needed to direct online calls. To make a call, it is needed to log in to the SIP account in SIP-telephone or in an online telephone exchange. Softphone, a kind of SIP-clients, can be installed on PC, tablet, and smartphone.
When a visitor calls the phone number from your website, Roistat forwards the call to the SIP-account.
If you have your own telephone exchange, the configuration will be much easier. To do it, you need to configure the SIP account in your telephone exchange without applying to customer service.
When a visitor calls the substitution phone number, Roistat forwards the call to the Roistat SIP account.
Roistat SIP account is generated automatically and is unique for each Roistat project.
Call forwarding is configured in two steps:
Set a password for SIP account;
To start receiving the calls, configure your telephone exchange or softphone using your account parameters.
Calls to Roistat SIP account are free of charge.
Roistat SIP account will be useful when you don't have a SIP account.
To work with Roistat SIP account, the telephone equipment should meet the following requirements:
It must not be blocked by firewall; Не должны подпадать под блокирующие правила сетевого экрана (firewall).
A request for registering the Roistat SIP account must be sent from public IP.
To create the Roistat SIP account and configure the call forwarding, go to scenario settings, and select the SIP for Roistat user in Step 2. Adjust settings for call forwarding and enter your account password:
The password should have the following format:
the password should contain at least 7 symbols;
the password should contain upper and lower case letters;
The account name (User field) is generated automatically and is unique for every Roistat project.
Save changes. After the account is activated, all calls should be redirected to it.
To start receiving the calls, just log in to your SIP client or enter the address of your account in your online telephone exchange.
After specifying the password a minute should pass. After this, you can try to receive the call from the Roistat SIP.
To disable the account, clear the password field and save changes.
Call forwarding to the Roistat SIP account works the following way:
To forward calls to an outside SIP account, the telephone exchange that has the SIP account should be able to receive the incoming calls to SIP URL without registering and entering the password.
Call forwarding to an outside SIP account is configured in Step 2. Adjust settings for call forwarding in the calltracking scenario. Select the SIP account and specify the address in the following format: email@example.com.
Please notice that Roistat forwards the website visitors' calls without being the online telephone exchange. To use the additional options, as forwarding to different managers or transmitting the call to the voice mail, use your online telephone exchange.
If you have a telephone exchange, configure the SIP account in it without applying to customer service.
The example of configuring the telephone exchange for Asterisk:
type=friend sendrpid=no qualify=no port=5060 nat=yes jbenable=no insecure=port,invite host=220.127.116.11 dtmfmode=rfc2833 disallow=all canreinvite=no call-limit=15 allow=g729&ulaw&alaw
Roistat transmits the following data while sending the information about the call:
|x-roistat-phone||11231234567||The number dialed by a client|
|x-roistat-marker||direct_search_1234567_buy glasses||Marketing source of the visit|
|x-roistat||123456||Visit number or marketing channel marker (when static calltracking is used)|
Forwarding to an outside SIP account works the following way: